POWER OPTIMIZIER

The SolarEdge module add-on power optimizer is connected by installers to the solar modules. Ease of installation is completed by simply clipping the power optimizer to the module frame or by attaching it to the rail with a single screw.
SolarEdge-Optimizador-1.jpg

P-Series Module Add-On Power Optimizers

Connected by installers to the PV module and compatible with a wide range of modules

Power Optimizer P Model Module Power Module Voc
P300 ≤ 300 W < 48 V
P350 ≤ 350 W < 60 V
P370 ≤ 370 W < 60 V
P500 ≤ 500 W < 80 V
P404 ≤ 405 W < 80 V
P405 ≤ 405 W < 125 V
P485 ≤ 485 W < 125 V
P505 ≤ 505 W < 83 V

 

 

 

 

 

 

 

 

 

* Also available with frames mounted in advance for quicker installation.

 

P-Series Commercial Power Optimizer

Commercial solution connecting two modules per power optimizer

Power Optimizer Model Module Power Module Voc
P600 ≤600W* < 96 V
P700 ≤700W* < 125 V

 

* Rated combined STC power of 2 modules connected in series. Module of up to +5% power tolerance allowed.

* Also available with frames mounted in advance for quicker installation.

 

Feature highlights:

  • Per-module Maximum Power Point Tracking (MPPT)
  • Superior efficiency (99.5% peak efficiency, 98.8% weighted efficiency) 
  • Mitigates all  types of modules mismatch-loss, from manufacturing tolerance to partial shading             
  • Designed for extreme environmental conditions
  • 25 year reliability and warranty
  • Advanced, real-time performance measurement
  • Automatic module DC voltage shut-down for installer and firefighter safety
  • Independent optimization technology (IndOP™) - allows operation with any inverter and requires no additional interface hardware 
  • Available with frames mounted in advance for quicker installation

 

SolarEdge, Typical grid connection System

    P300 P350 P401 P500 P404 P405 P485 P505
    60 cell 60/72 cell 60/72 cell 96 cell 60/72 cell Thin Film Thin Film Hight current
INPUT
Rated Input DC Power (1) W 300 370 400 500 405 405 485 505
Absolute Maximum Input Voltage
(Voc at lowest temperature)
Vdc 48 60 60 80 80 125 125 83
MPPT Operating Range Vdc 8 - 48 8 - 60 8 - 60 8 - 80 12,5 - 80 12,5 - 105 12,5 - 105 12,5 - 83
Maximum Continuous Input Current (Isc) Adc 11 11 11,75 10,1 10,1 10,1 10,1 14
Maximum Efficiency % 99,5
Weighted Efficiency % 98,8
Overtoltage Category   II
OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)
Maximum Output Current Adc 15
Maximum Output Voltage Vdc 60 60 60 60 85 85 85 85
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF)
Safety Output Voltage per Power Optimizer Vdc 1 ± 0,1
STANDARD COMPLIANCE
EMC   FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3
Safety   IEC62109-1 (class II safety), UL1741
RoHS   Yes
Fire Safety   VDE-AR-E 2100-712:2013-05
INSTALLATION SPECIFICATIONS
Maximum Allowed System Voltage Vdc 1000
Dimensions (W x L x H) mm 128 x 152 x 28 128 x 152 x 28 129 x 153 x 30 129 x 153 x 34 128 x 152 x 36 129 x 90 x 59 129 x 90 x 59 129 x 162 x 59
Weight (including cables) gr 655 655 655 750 775 845 845 1064
Input Connector   MC4 (2)
Output Connector   MC4
Output Wire Length m 1,2
Operating Temperature Range º C -40 +85
Protection Rating   IP68 / NEMA6P
Relative Humidity % 0 - 100

 

(1) Rated STC power of the module. Module of up to +5% power tolerance allowed.
(2) For other connector types please contact SolarEdge.
(3) For ambient temperature above +70˚C / +158˚F power de-rating is applied. Refer to “Power Optimizers Temperature De-Rating Application Note” for more details.

 

 

PV SYSTEM DESIGN

Single Phase

HD Wave

Single Phase

Three phases

Minimum String Length
(Power Optimizers)
P300, P370, P401, P500 8 8 16
P404, P405, P485, P505  6 6 14 (13 with SE3K)
P600, P700 - - 13 (26 modules)
P650 - P950 - - 14 (27 modules)

Maximum String Length

(Power Optimizers)

P300 - P505 25 25 50
P600 - P950 - - 30 (60 modules)
Maximum Power per String 5.700 W 5.250 W 12.750 W (*)
Parallel Strings of Different Lengths or Orientations Yes Yes Yes

 

It is not allowed to mix P404/P405 with P300/P370/P500/P600/P700 in one string.
     It is not allowed to mix P600/P700 with P300/P370P500/P404/P405 in one string
     P600 and P700 can be mixed in one string.

(5) For SE15k and above, the minimum DC power should be 11KW.
(6) The P370/P401/P500 cannot be used with the SE3K three phase inverter (available in some countries; refer to the three phase inverter SE3K-SE10K datasheet). 
(7) Exactly 10 when using SE3K-RW010BNN4
(8) For the 230/400V grid: it is allowed to install up to 13,500W per string when the maximum power diference between each string is 2,000W.
(9) For the 277/480V grid: it is allowed to install up to 15,000W per string when the maximum power diference between each string is 2,000W

P300, P370, P401, P500, pueden mezclarse en un mismo sring
  • P404, P405, P485, P505, it is allowed to mix in one string
  • P600, P650, P730, P801, it is allowed to mix in one string
  • P800p, P850, it is allowed to mix in one string.
  • P950 it is not allowed to mix with anyother optimizer.
  • In a case of odd number of PV modules in one string it is allowed to install one P650/P730/P850/P800p/P801/P950 power optimizer connected to one PV module. When connecting a single module to the P800p seal the unused input connectors with the supplied pair of seals.

(*) With P650/P730/P801 up to 13,500W per string may be installed, with P850/P800p up to 15,750W and with P950 up to 16,250W per string may be installed when the maximumpower difference between each string is 2,000W

 

 

    P600 P650 P700 P730 P800p P801 P850 P950
    2 x 60 Cell 2 x 60 cell 2 x 72 cell 2 x 72 cell 2 x 96 cell 2 x 73 cell 2 x Hight power 2 x Hight power
INPUT
Rated Input DC Power (1) W 600 650 700 730 800 800 850 950
Absolute Maximum Input Voltage
(Voc at lowest temperature)
Vdc 96 96 125 125 83 125 125 125
MPPT Operating Range Vdc 12,5 - 80 12,5 - 80 12,5 - 105 12,5 - 105 12,5 - 83 12,5 - 105 12,5 - 105 12,5 - 105
Maximum Continuous Input Current (Isc) Adc 10,10 11 10,10 11 7 11 12,5 12,5
Maximum Efficiency % 99,5
Weighted Efficiency % 98,6
Overtoltage Category   II
OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)
Maximum Output Current Adc 15 15 15 15 18 15 18 17
Maximum Output Voltage Vdc 85 85 85 85 85 85 85 85
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF)
Safety Output Voltage per Power Optimizer Vdc 1 ± 0,1
STANDARD COMPLIANCE
EMC   FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3
Safety   IEC62109-1 (class II safety), UL1741
RoHS   Yes
Fire Safety   VDE-AR-E 2100-712:2013-05
INSTALLATION SPECIFICATIONS
Maximum Allowed System Voltage Vdc 1000
Dimensions (W x L x H) mm 129 x 153 x 43 129 x 153 x 43 129 x 153 x 50 129 x 153 x 50 129 x 153 x 59 129 x 153 x 50 129 x 162 x 59 129 x 162 x 59
Weight (including cables) gr 834 834 933 933 1019 933 1064 1064
Input Connector   MC4 (2)
Output Connector   MC4
Output Wire Length m 1,2
Operating Temperature Range º C -40 +85
Protection Rating   IP68 / NEMA6P
Relative Humidity % 0 - 100

 

(1) Rated STC power of the module. Module of up to +5% power tolerance allowed.
(2) For other connector types please contact SolarEdge.
(3) For ambient temperature above +70˚C / +158˚F power de-rating is applied. Refer to “Power Optimizers Temperature De-Rating Application Note” for more details.

 

PV SYSTEM DESIGN

Single Phase

HD Wave

Single Phase

Three phases

Minimum String Length
(Power Optimizers)
P300, P370, P401, P500 8 8 16
P404, P405, P485, P505  6 6 14 (13 with SE3K)
P600, P700 - - 13 (26 modules)
P650 - P950 - - 14 (27 modules)

Maximum String Length

(Power Optimizers)

P300 - P505 25 25 50
P600 - P950 - - 30 (60 modules)
Maximum Power per String 5.700 W 5.250 W 12.750 W (*)
Parallel Strings of Different Lengths or Orientations Yes Yes Yes

 

It is not allowed to mix P404/P405 with P300/P370/P500/P600/P700 in one string.
     It is not allowed to mix P600/P700 with P300/P370P500/P404/P405 in one string
     P600 and P700 can be mixed in one string.

(5) For SE15k and above, the minimum DC power should be 11KW.
(6) The P370/P401/P500 cannot be used with the SE3K three phase inverter (available in some countries; refer to the three phase inverter SE3K-SE10K datasheet). 
(7) Exactly 10 when using SE3K-RW010BNN4
(8) For the 230/400V grid: it is allowed to install up to 13,500W per string when the maximum power diference between each string is 2,000W.
(9) For the 277/480V grid: it is allowed to install up to 15,000W per string when the maximum power diference between each string is 2,000W

P300, P370, P401, P500, pueden mezclarse en un mismo sring
  • P404, P405, P485, P505, it is allowed to mix in one string
  • P600, P650, P730, P801, it is allowed to mix in one string
  • P800p, P850, it is allowed to mix in one string.
  • P950 it is not allowed to mix with anyother optimizer.
  • In a case of odd number of PV modules in one string it is allowed to install one P650/P730/P850/P800p/P801/P950 power optimizer connected to one PV module. When connecting a single module to the P800p seal the unused input connectors with the supplied pair of seals.

(*) With P650/P730/P801 up to 13,500W per string may be installed, with P850/P800p up to 15,750W and with P950 up to 16,250W per string may be installed when the maximumpower difference between each string is 2,000W

 

Catálogo General 2020

  • SolarEdge-Optimizador-1.jpg
  • SolarEdge-Optimizador-2.jpg
  • SolarEdge-Optimizador-3.jpg
  • Optimizador SolarEdge P850.jpg
  • Optimizador SolarEdge P800.jpg

Do you want more information about this product?

bornay@bornay.com  |  (+34) 965 560 025  |  Skype

We use own and third-party cookies to improve our services and obtain statistics by analyzing their browsing habits. You can accept the use of this site or reject it leaving the web. Get more information or how to change the settings: Cookies policy