BLUESOLAR PWM

Three models: 5A, 10A or 20A at 12V or 24V *
Regulador-solar-pwm-Victron-Energy-BlueSolar.jpg
  • Low cost PWM controller
  • Internal temperature sensor
  • Three stage battery charging (bulk, absorption, float)
  • Protected against over current
  • Protected against short circuit
  • Protected against reverse polarity connection of the solar panels and/or battery
  • With low voltage load disconnect output
  • Optional remote display (20A model only)

BlueSolar PWM-Light 12/24-5 12/24-10 12/24-20 12/24-30
Battery voltage 12/24 V, with automatic system voltage detection
Rated charge current 5 A 10 A 20 A 30 A
Automatic load disconnect Yes
Maximum solar voltage

28 / 55 V

(Use 36 cell solar panels for 12 volts, 72 cell solar panels for 24 volts)

Self-consumption < 10 mA
Load output Manual control + low voltage disconnect
Protection

Battery reverse polarity (fuse)

Output short circuit

Over temperature

Overload protection

Shut down after 60 s in case of 130% load

Shut down after 5 s in case of 160% load

Short circuit: immediate shut down

Grounding Common positive
Operating temp. range -20 to 50 ºC (full load)
Humidity (non-condensing) Max. 95 %
Battery
Charge voltage "absorption" 14,2 / 28,4 V
Charge voltage "float" 13,8 / 27,6 V
Low voltage disconnect 11,2 / 22,4 V
Low voltage load reconnect

12,6 / 25,2 V (manual)

13,1 / 26,2 (automatic)

Enclosure
Protection class IP20
Terminal size 5 mm2 / AWG 10
Weight 0,15 Kgr. 0,2 Kgr
Dimmensions (h x w x d) 70 x 133 x 33,5 mm
Standards
Security IEC 62109-1
EMC EN 61000-6-1, EN 61000-6-3

 

BlueSolar PWM-Light 48V 48-10 48-20 48-30
Battery voltage 48 V
Rated charge current 10 A 20 A 30 A
Automatic load disconnect Yes
Maximum solar voltage 100 V
Self-consumption < 10 mA
Load output Manual control + low voltage disconnect
Protection

Battery reverse polarity (fuse)

Output short circuit

Over temperature

Overload protection

Shut down after 60 s in case of 130% load

Shut down after 5 s in case of 160% load

Short circuit: immediate shut down

Grounding Common positive
Operating temp. range -20 to 50 ºC (full load)
Humidity (non-condensing) Max. 95 %
Battery
Charge voltage "Bulk" 58,0 V
Charge voltage "absorption" 56,8 V
Charge voltage "float" 55,2 V
Low voltage disconnect 44,8 V
Low voltage load reconnect

50,4 V (manual)

52,4 V (automatic)

Enclosure
Protection class IP20
Terminal size 6 mm2 / AWG 10
Weight 0,17 Kgr.
Dimmensions (h x w x d) 95 x 140 x 33,5 mm
Standards
Security IEC 62109-1
EMC EN 61000-6-1, EN 61000-6-3

 

BlueSolar PWM-Pro 12/24-5 12/24-10 12/24-20 12/24-30
Battery voltage 12/24 V, with automatic system voltage detection
Rated charge current 5 A 10 A 20 A 30 A
Automatic load disconnect Yes
Maximum solar voltage

28 / 55 V

(Use 36 cell solar panels for 12 volts, 72 cell solar panels for 24 volts)

Self-consumption < 10 mA
Load output Manual control + low voltage disconnect
Protection

Battery reverse polarity (fuse)

Output short circuit

Over temperature

Battery temperature sensor Optional (article SCC940100100)
Temperature compensation -30 mV/ºC resp. -60 mV/ºC (If temperature sensor installed)
Remote panel Optional (article SCC900300000)
Grounding Common positive
Operating temp. range -20 to 50 ºC (full load)
Humidity (non-condensing) Max. 98 %
Battery
Charge voltage "absorption" 14,4 / 28,8 V
Charge voltage "float" 13,8 / 27,6 V
Equalization voltage 14,6 / 29,2 V
Low voltage load disconnect

12,6 / 25,2 V

Low voltage load reconnect 13,1 / 26,2 V
Enclosure
Protection class IP30
Terminal size 4 mm2 4 mm2 10 mm2 10 mm2
Weight 0,13 Kgr. 0,3 Kg 0,5 Kg
Dimmensions (h x w x d) 138 x 70 x 37 mm 160 x 82 x 48 mm 200 x 100 x 57 mm
Standards
Security IEC 62109-1
EMC EN 61000-6-1, EN 61000-6-3

 

BlueSolar PWM LCD & USB 12/24-5 12/24-10 12/24-20 12/24-30 48-10 48-20 48-30
Battery Voltage 12/24v. with automatic system voltage detection 48 V
Rated charge current 5 A 10 A 20 A 30 A 10 A 20 A 30 A
Automatic load disconnect Yes
Maximum solar voltage 28 / 55 V (1) 100 V (1)
Self-consumption < 10 mA
Load output Manual control + low voltage disconnect + timer
Protection

Battery reverse polarity (fuse)

Output short circuit

Timer

Overload protection

Shut down after 60 sec in case of 130 % load

Shut down load after 5 sec in case of 160 % load

Short circuit: immediate shut down

Grounding Common positive
Operating temperature gante -35 to 60 ºC (full load)
Humidity (non-condensating) Max. 95 %
Battery
Charge voltage "absorption"

14,4 / 28,8 V

57,6 V
Charge voltage "float" (2) 13,7 / 27,4 V 54,8 V
Low voltage load disconnect 11,2 / 22,4 V 44,8 V
Low voltage load reconnect 12,6 / 25, 2V 50,4 V
USB
Voltage 5 V
Current 2 A (total from 2 outputs)
Enclosure
Protection class IP20
Terminal size 6 mm2 / AWG 10 16 mm2 / AWG 6
Weight 0,15 Kg 0,3 Kg
Dimensions (h x w x d) 96 x 169 x 36 mm 101 x 184 x 47 mm
Standards
Safety EN60335 - IEC 62109-1
EMC EN 61000-6-1, EN 61000-6-3, ISO 7637-2

 

1) For 12V use 36 cell solar panels. For 24V use 72 cell solar panels or 2x 36 cell in series For 48V use 2x 72 cell solar panels or 4x 36 cell in series

2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached. Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered.

Catálogo General 2020

  • Regulador-solar-pwm-Victron-Energy-BlueSolar.jpg
  • BlueSolar_PWM_DUO.jpg
  • BlueSolar_display_PWM_DUO.jpg
  • BlueSola_PWM_48V.jpg
  • BlueSolar_PWM_Pro.jpg
  • BlueSolar PWM LCD USB.jpg

Do you want more information about this product?

bornay@bornay.com  |  (+34) 965 560 025  |  Skype