ZAPTEC PRO
Charging system designed to grow
Zaptec Pro is an intelligent EV charging solution designed for installations where a single charging point is not enough. It is ideal for residential communities, shared parking areas, businesses, fleets, public car parks, hotels, offices and new residential developments.
It is not just a charger, but a complete charging infrastructure, built to manage multiple users efficiently, safely and with full scalability.
True scalability for large installations
One of the key advantages of Zaptec Pro is its ability to grow with the installation. It allows you to start with just a few charging points and gradually expand the network as demand increases, without redesigning the electrical infrastructure.
This enables investment to match real needs, avoiding unnecessary upfront costs while supporting long-term development.
It is the ideal solution for projects that evolve over time, from small initial setups to networks with hundreds or even more than 1000 chargers.
Flexible installation with backplate system
Zaptec Pro uses an independent backplate system, allowing the electrical installation to be completed first and chargers added later as needed.
This reduces initial costs and ensures fast, scalable expansion without major electrical work.
Dynamic load and phase balancing
The system automatically distributes available energy between all connected chargers, adjusting power in real time to maximize efficiency.
It can also dynamically switch between single-phase and three-phase charging, enabling more chargers to be installed on the same line.
Future-ready connected charging network
All chargers operate as part of a smart connected network, allowing communication between devices and optimized energy management.
This makes Zaptec Pro a future-proof solution for evolving EV infrastructure projects.
Integrated protection for safe installations
Zaptec Pro includes integrated fuses and Type B residual current protection, with automatic self-testing before each charging cycle.
This enhances safety, simplifies installation and reduces the need for additional external protections.
Accurate energy metering and cost allocation
The system includes MID-certified energy metering, enabling precise consumption tracking and cost distribution in shared installations.
Centralised management via Zaptec Portal
Through the Zaptec Portal, installers and operators can monitor status, manage users, view charging history and perform remote updates.
Built for professional environments
Zaptec Pro supports wall or column mounting, indoor and outdoor installation, and advanced connectivity via 4G LTE-M, Wi-Fi and PLC.
Installation process
See how the installation works from backplate to final charger:
Interactive demo
Discover how the system behaves under different configurations:
A future-ready solution
Zaptec Pro combines scalability, efficiency, safety and advanced control in a single solution designed for evolving EV charging infrastructures.
Specifications
| Technical specifications | |
| Nominal voltage |
TN, IT and TT 230 V AC ± 10 % 400 V AC ± 10 % |
| Charging power |
22 kW at 32 A / three-phase (TN networks only)* 12.7 kW at 32 A / three-phase (IT networks)* 7.4 kW at 32 A / single-phase (IT/TN networks)* |
| Maximum current |
32 A per phase |
| Frequency | 50 / 60 Hz |
| Installation circuit |
Series fuse max. 63 A in the installation circuit for charging stations. |
| Fuses |
Integrated; 3 x 40 A type C fuses |
| Earth fault protection |
Integrated Type B RCD Self-test and calibration before each charging cycle Automatic reset when unplugging the charging connector |
| Electrical protection |
Protection class I Overvoltage category III |
| Backplate connection box |
Cable cross-section 2.5 – 10 mm² Cable diameter 10 – 20 mm |
| Load balancing |
Available power is automatically distributed between all Zaptec Pro chargers and phases. |
| Phase balancing |
The charger dynamically selects single-phase or three-phase connection depending on available power. |
| Communication |
4G LTE-M Wi-Fi 2.4 GHz, IEEE 802.11 b/g/n (channels 1–11) Powerline (PLC) – HomePlug Green PHY®, 10 Mbps |
| Identification and configuration |
Bluetooth Low Energy (BLE 4.1) RFID/NFC reader – Mifare Classic, type A Plug & Charge – Hardware support for ISO 15118 RGBW LED ring status indicator |
| Standby consumption | 3 W standby |
| Energy metering |
MID class B tested and calibrated (EN 50470) |
| Environmental specifications | |
| Operating temperature |
From -30 °C to +40 °C |
| Protection rating |
IP54, indoor and outdoor use Impact protection IK10 UL94 5VB flammability rating UV resistant |
| Mechanical specifications | |
| Dimensions |
H: 392 x W: 258 x D: 112 mm |
| Weight | ~ 5 kg (including backplate) |
| Cable length | No cable, Type 2 socket |
| Charging socket |
IEC 62196-2 Type 2, with integrated auto-closing cover User can permanently lock the connector |
| Anti-theft protection |
The front cover can only be opened with a special tool The charging cable can be permanently locked |
| Compliance | |
| Standards and applications |
CE compliance according to Radio Equipment Directive 2014/53/EU RoHS 2011/65/EU IEC 61851-1 (TÜV SÜD) IEC 61851-21-2 |
| Available software interfaces | |
|
Zaptec App Zaptec Portal (centralised management) Third-party integration (API, Webhooks) OCPP 1.6J |
|
* 32 A is available but may be limited by vehicle battery status and temperature conditions.
Do you want more information about this product?
bornay@bornay.com | (+34) 965 560 025 | Skype