Victron Energy Battery Chargers

CENTAUR

Cargador-baterías-Centaur-Victron-Energy1.jpg

Quality without compromise

Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air.

Circuit boards are protected with an acrylic coating for maximum corrosion resistance.

Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme env ironmental conditions.

Universal 90-265V AC input voltage range and also suitable for DC supply

All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. The chargers also accept a 90-400V DC supply.

Three outputs that each can supply the full output current


Three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current.

Three stage charging, with temperature compensation


The Victron Energy Centaur charges at bulk rate until the output has reduced to 70 % of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate.
An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell.

Voltage selector

A dip switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries.

  12 / 20

12 / 30

24 / 16

12 / 40 12 / 50

12 / 60

24 / 30

12 / 80
24 / 40

12 / 100

24 / 60

Nominal output current 20 Amp 30 / 16 Amp 40 Amp 50 Amp 60 / 30 Amp 80 / 40 Amp 100 / 60 Amp
Temperature sensor Internal, = 2 mV/ºC per element
Absorption battery voltage 14,3 / 28,5 Vdc 2
Float battery voltage 13,5 / 27,0 Vdc 2
Input voltage AC 90 - 265 Vac / 45-65 Hz, Power factor = 1
Charge IUoU (3-stages charger)
Recommended battery capacity (Ah) 80 - 200

120 - 300

45 / 150

160 - 400 200 - 500

240 - 600

120 - 300

320 - 800

160-400

400 - 1000

240 - 600

Operating temperature range - 20 to 60 ºC
Battery connection (studs) M6 M6 M6 M8 M8 M8 M8
AC Connection Scew clamp 4 mm2
Dimmensions 355 x 215 x 210 426 x 239 x 135 505 x 255 x 130
Weight 3,8 kgr 5 Kgr 12 Kgr
Warranty 2 years


1 Standard setting. Optimum charge/float voltages for Flooded Lead-acid, Gel-Cell or AGM batteries selectable by dip switch.

2 Up to 40 °C (100 °F) ambient. Output will reduce to approximately 80 % of nominal at 50 °C and 60 % of nominal at 60 °C.

Catálogo General 2020

  • Cargador-baterías-Centaur-Victron-Energy1.jpg
  • Cargador-baterias-Victron-Energy-Centaur-2.jpg

Do you want more information about this product?

bornay@bornay.com  |  (+34) 965 560 025  |  Skype