Steca Solar Controllers

SOLSUM

6.6c, 8.8c, 10.10c
 PDF sheet  Printable version
Regulador-solar-Steca-solsum.jpg

The Steca Solsum is one of the most sold charge controllers on the market. It is optimally suited for use in solar home systems with load currents of up to 10 A at 12 V/24 V and up to 240 Wp module output.

The Solsum C generation has a completely protected circuit board and is distinguished by its clear display, which uses two LEDs. This generation of charge controllers has also been conceived to allow the controllers to be made and repaired on-site in large projects.

Product features

  • Shunt controller
  • Voltage regulation
  • Automatic detection of voltage
  • PWM control
  • Multistage charging technology
  • Load disconnection depending on voltage
  • Automatic load reconnection
  • Temperature compensation
  • Common positive or negative grounding on one terminal
  • Monthly maintenance charge

Electronic protection functions

  • Overcharge protection
  • Deep discharge protection
  • Reverse polarity protection of module and battery
  • Reverse polarity protection by internal fuse
  • Automatic electronic fuse
  • Short circuit protection of load and module
  • Overvoltage protection at module input
  • Open circuit protection without battery
  • Reverse current protection at night
  • Overtemperature and overload protection
  • Battery overvoltage shutdown

Displays

  • Multi-coloured LED
  • 2 LEDs show operating states
  • for operation, state of charge, fault messages

Certificates

  • Approved by the World Bank for Bangladesh, China, Laos, Nepal, Sri Lanka, Uganda and Indonesia
  • Fit for use in tropical areas (DIN IEC 68 part 2-30)
  • Compliant with European Standards (CE)
  • RoHS compliant
  • Developed in Germany
  • Manufactured according to ISO 9001 and ISO 14001

  6.6c 8.8c 10.10c

Performance

      
System voltage 12/24 V
Own consumption < 4 mA
DC input side
Maximum open circuit voltage < 47 Vcc
Module current 6 Amp 8 Amp 10 Amp
DC output side
Load current 6 Amp 8 Amp 10 Amp
End of charge voltage 13,9 / 27,8 Vcc
Boost charge voltage 14,4 / 28,8 Vcc
Reconnection voltage ( LVR) 12,4 - 12,7 Vcc / - 22,4 - 25,2 Vcc
Deep discharge protection (LVD)  11,2 - 11,6 Vcc / 22,4 - 23,2 Vcc
Operating conditions      
Ambient temperature -25 ºC a + 60 ºC
Fiting and construction      
Terminal (fine / single wire) 4 mm2 / 6 mm2
Degree of protection IP 32
Dimensions 145 x 100 x 30 mm
Weight 150 gr.

 

Technical data at  25 ºC

Catálogo General 2020

pdf Catalogo-Bornay-0520.pdf ( 21.51 MiB )

Do you want more information about this product?

I accept the privacy policy
In accordance with the provisions of organic law 15/1999 of protection of Personal character data, BORNAY AEROGENERADORES SLU informs users of their websites that the personal data collected by the company through the sites forms on your pages, will be entered into an automated file under the responsibility of BORNAY AEROGENERADORES SLU, in order to facilitate, streamline, and the commitments established between both parties. Likewise, BORNAY AEROGENERADORES SLU advises of the possibility of exercising rights of access, cancellation, rectification and opposition by writing to the address BORNAY AEROGENERADORES SLU; PI RIU, RIU SN, 03420 CASTALLA. While you do not tell us otherwise, we will understand that their data has not been modified, that you agree to notify us of any changes, and we have the permission to use them in order to be able to retain the relationship between the parties.

bornay@bornay.com  |  (+34) 965 560 025  |  Skype