PYLONTECH

Pylontech lithium LiFePo4 batteries, are Low Voltager modular batteries, with a nominal voltage of 24 and 48 volts under 19' Rach format, and compatible with the main inverter manufacturers: Victron Energy, Voltronic, Studer, Voltronic, Sungrow, Imeon ...
Pylontech batteries can be installed in parallel into the same Rack, with a maximum of 8 units for model US2000B or 12 units of model US300, and by using Pylontech LV-Hub you can install up to 5 Racks in paralel, that allow us to arrive to big capacity storage systems with lithium batteries, from 2,4 up to 210 kWh.
Pylontech UP2500 at 25,6 volts and 2,55 kWh of capacity we can install up to 20 units in parallel with a peak power storage of 51 kWh.
Pylontech lithium batteries have a series of advantages like:
Battery Management Sytems (BMS)
Each battery has his own BMS, Battery Management Sytem that controls the charge, discharge and temperature of the battery, and prevent damages when security parameters are exceded and including a cell balance system.
Cycle Life
Vertical industry integration ensures more than 6000 cycles with 90% DoD Compact and fashionable design fits in your sweet home environment Modular design gives the end customers the power of choice of capacity.
Weight
Compared with other battery technologies, like Lead Acid, Lithium battery is much more lighter. In this case, each Pylontech module has a weight between 24 to 32 Kgr, depending of the model.
Charge / Discharge capacity
Recommended Charge / Discharge capacity on this batteries is 0,5 C ( 25 to 37 Amp depending of the model), and allow a capacity op to 1 C (50 to 37 Amp depending of the model), and a maximum charge / discharge capacity of 100 Amp during a period of 15 seconds.
Modularity
As show, his 19' Rack format allo multiple configurations. Pylontech Lithium batteries can be installed over any Rack or using Pylontech brakets
Características
UP 2500 | US 2000B Plus | US3000 | |
Características eléctricas | |||
Voltaje nominal | 25,6 Vcc | 48 Vcc | 48 Vcc |
Capacidad nominal | 2840 Wh | 2400 Wh | 3552 Wh |
Capacidad útil | 2550 Wh | 2200 Wh | 3200 Wh |
Voltaje de descarga | 23,0 - 28,8 Vcc | 45,0 - 53,5 Vcc | 45,0 - 53,5 Vcc |
Voltaje de carga | 28,2 - 28,8 Vcc | 52,5 - 53,5 Vcc | 52,5 - 53,5 Vcc |
Corriente de carga / descarga recomendada | 56 Amp | 25 Amp | 37 Amp |
Corriente de carga / descarga máxima | 50 Amp | 100 Amp | |
Corriente de carga / descarga pico | 111 Amp @15 seg | 100 Amp @15 seg | 100 Amp @ 15 seg |
Configuración | |||
Nº máximo de unidades en paralelo | 20 | 8 | 12 |
Nº máximo de strings | 1 | 5 con Pylontech HUB-LV | 5 con Pylontech HUB-LV |
Puertos de comunicaciones | RS232, RS485, CAN | RS232, RS485, CAN | RS232, RS485, CAN |
Características medioambientales | |||
Temperatura de trabajo | 0 - 50 º C | 0 - 50 º C | 0 - 50 º C |
Temperatura de almacenamiento | -20 - 60 º C | -20 - 60 º C | -20 a 60 º C |
Humedad | 5 - 90 % | 5 - 85 % | 5 - 85 % |
Altitud máxima | 2000 mts | 2000 mts | 2000 mts. |
Vida útil | |||
Ciclos de vida | > 6000 a 25 ºC | > 4500 a 25 ºC | > 4500 a 25 ºC |
Diseño de vida | + 10 años a 25 ºC | + 10 años a 25 ºC | + 10 años a 25 ºC |
Características físicas | |||
Dimensiones | 442 x 420 x 119 mm | 442 x 410 x 89 mm | 442 x 420 x 132 mm |
Peso | 27,5 Kgr | 24 Kgr | 32 Kgr |
Normativa | |||
Normas | IEC62619 / CE / UN38.3 | TÜV / CE / UN38.3 | TÜV / CE / UN38.3 |
Descargas
Catálogo General 2020
Catálogo Pylontech UP2500
Catálogo Pylontech
Catálogo Pylontech HUB-LV
Manual Pylontech UP2500
Manual Pylontech US2000B
Configuración Victron Energy
Lista de equipos compatibles Pylontech
Garantía Pylontech US200B Plus
¿Quiéres más información sobre este producto?
bornay@bornay.com | (+34) 965 560 025 | Skype