Victron Energy Battery Chargers

SKYLLA

  • Cargador-baterías-Victron-Energy-Skylla.jpg
  • Cargador-baterías-Victron-Energy-Skylla-24/50.jpg
  • Cargador-baterías-Victron-Energy-Skylla-2,jpg.jpg
  • Panel-control-cargador-Victron-Skylla-3.jpg

Perfect chargers for any type of battery

Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life.

Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.

Suitable for AC and DC supply

Except for the 3 phase input models, the chargers also accept a DC supply.

Controlled charging

Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.

Use of TG chargers as a power supply

As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available.

Two outputs to charge 2 battery banks (24V models only)

The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery.

To increase battery life: temperature compensation

Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.

Battery voltage sense

In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
 

Do you want more information about this product?

bornay@bornay.com  |  (+34) 965 560 025  |  Skype

 

24 / 30 TG

24 / 50 TG

24 / 50 TG

3-phases

24 / 80 TG 24 / 100 TG

24 / 100 TG

3-phases

48 / 25 TG 48 / 50 TG
Charge current output 30 / 50 Amp 50 Amp 80 Amp 100 Amp 100 Amp 25 Amp 50 Amp
Charge current output auxiliar 4 Amp 4 Amp 4 Amp 4 Amp 4 Amp - -
Absorption charge voltage 28,5 Vdc 28,5 Vdc 28,5 Vdc 28,5 Vdc 28,5 Vdc 57 Vdc 57 Vdc
Input voltage AC

185 - 264 Vac

45 - 65 Hz

320 - 450 Vac

45 - 65 Hz

185 - 264 Vac

45 - 65 Hz

320 - 450 Vac

45 - 65 Hz

185 - 264 Vac

45 - 65 Hz

Charge characteristic IUoUo (3-stage charger)
Protections Output short circuit. Battery reverse polarity detection. Battery voltage too high. Temperature too high
Recommended battery capacity 150 - 500 Ah 250 - 500 Ah 400 - 800 Ah 500 - 1000 Ah 500 - 1000 Ah 125 - 250 Ah 125 - 250 Ah
Operating termperature range - 20 to 60 ºC
Battery connectors M8 studs
AC Connectors Screw clamp 2,5 mm2
Dimensions (mm) 365 x 250 x 147 365 x 250 x 257 515 x 260 x 265 365 x 250 x 147 265 x 250 x 257
Warranty 2 years

 

We use own and third-party cookies to improve our services and obtain statistics by analyzing their browsing habits. You can accept the use of this site or reject it leaving the web. Get more information or how to change the settings: Cookies policy