PEAK POWER PACK

A Li-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger and outstanding peak output power performance.
Victron-Energy-Peak-Power-Pack.jpg Peak power pack 8
Batería-Lithio-Peak-Power-Pack.jpg Batería Lithio Peak Power Pack 20
Batería-Peak-Power-Pack-Victron-Energy.jpg Baterías Victron Energy Peak Power Pack 30
Batería-auxiliar-Peak-Power-Pack.jpg Batería Auxiliar Peak Power Pack 40
PPP-frontal.jpg Frontal Peak Power Pack

A Li-ion battery pack with intrinsically safe LiFePO4 cells, a built-in charger and outstanding peak output power performance.

Nominal voltage: 12,8V
Battery capacity range: 8Ah to 40Ah

Low weight and easy to install
- Ideally suited for mobile applications

Thoroughly protected against misuse
- Excellent performance in solar and other applications where frequent deep discharge and insufficient recharge would quickly damage lead-acid batteries

Output 1: high current output for caravan movers and other high power applications
- Caravan mover application: automatic shutdown of the high power output 30 minutes after enabling
- Other applications: the high power output can be switched to ‘always on’ mode
- Short circuit proof
- With battery over discharge protection

Output 2: auxiliary output for low power DC loads (not available on 8Ah model)
- Always on
- Short circuit proof
- With battery over discharge protection

Input 1: multi-purpose vehicle battery /solar charger input
- Voltage and current regulated to safely charge the Li-ion battery. Virtually any source of electric power can be connected to this input, as long as 11V < Vin < 20V

Input 2: second input to connect a power supply
- A 3A power supply is included (connects to 100/240 VAC mains)

Fast charging possible through input 1 (high current output)
- A battery charger, inverter/charger, solar charge controller or alternator can be connected to the high power output for fast charging. Maximum charge current 40A and maximum charge voltage 14,4V.

Storage mode
- Reduces battery current drain to virtually zero. Prevents damage due to battery over discharge during long term storage.

Remote on/off and status indication
- Connects to a.o. a push button (included) with bi-colour LED status indication

Push button:

  • Press shortly: high power output on during 30 m, LED red
  • Press during 2 s: high power output permanently on, LED red, slow flash
  • Press during 5 s: storage mode, LED blue, flashes 10 times
  • Battery charged through input 1, LED blue, slow flash
  • Battery fully charged, LED blue, solid
  • Over load or over temperature, LED red, flash

VE.Direct port: connects to a computer or a smart phone
(VE.Direct to USB cable resp. VE.Direct Bluetooth Smart dongle needed)

  • Output 1: on / 30 minute timer / off
  • Output 2: on/off
  • Input 1: on/off
  • Battery voltage
  • Temperature and alarms

Specifications

Peak Power Pack PPP-8 PPP-20 PPP-30 PPP-40
Capacity 8 Ah 20 Ah 30 Ah 40 Ah
Stored energy 102 Wh 256 Wh 384 Wh 512 Wh
Battery type Lithium-ion (LiFePo4)
Nominal voltage 12,8 V
No load battery drain when on < 13 Ah / year (< 1,4 mA)
Battery drain in storage mode < 6,5 Ah / año (< 0,7 mA)
Output 1: High current output
Continnuous output current 150 Ah
Maximum output current (10 sec) 200 Ah
Short circuit trip level 300 Ah
Protections Overload / Short circuit / over temperature / over discharge
Maximum input (charge) current 40 A (not protected)
Maximum input (charge) voltage 14,4 V (not protected)
Maximum clabel cross sections 16 mm2 (scew terminals)
Output 2: Auxiliary output
Continuous output current n.a. 30 A
Maximum output current (10 sec) n.a. 50 A
Short circuit trip level n.a. 80 A
Protections n.a. Overload / Short circuit / over temperature / over discharge
Maximum input (charge) current n.a. 10 A (not protected)
Maximum input (charge) voltage n.a. 14,4 V (not protected)
Maximum cable cross sections n.a. 6 mm2 (screw terminals)
Input 1: Multi-purpose vehicle battery / solar charger input
Input voltage range 11 V < Vin < 20 V
Input current limit 7 A
Input 2: power adapter
Adapter output voltage 15 V
Adapter output current 3 A
Adapter input voltage 100 / 240 Vac 50 / 60 Hz.
General
Monitoring and control Multi-functional push button with bi-colour LED
VE.Direct port

Connects to a computer (VE.Direct to USB cable needed) or

a smart phone (VE.Direct Bluetooth Smart dongle needed)

Operating temperature range Batt. charging: 0°C to 40°C Batt. discharging: -20°C to +40°C Storage: -20°C to +40°C
(charging / discharging inhibited when outside specified temperature range)
Humidity Max. 95 % (non-condensing)
Weight 2,2 kg 3,8 Kg 5,4 Kg 8,6 Kg
Dimensions ( h x w x d ) 190 x 172 x 90 mm 190 x 172 x 130 mm 190 x 172 x 170 mm 190 x 172 x 210 mm
Standards
Safety EN/IEC 60335-1, EN/IEC 60335-2-29, EN/IEC 62109
Emission, immunity EN55014-1, EN 55014-2, EN/IEC 61000-3-2, EN/IEC 61000-3-3, EN/IEC 61000-6-1, EN/IEC 61000-6-3, EN 50498