WIND +

Wind + is the result of over 45 years of experience in the small wind industry, where Bornay has worked hard to innovate and to get a so far unknown result.
Bornay 13+01.jpg Aerogenerador minieolica Bornay Wind 13+
Bornay 252+01.jpg Aerogenerador minieolica Bornay Wind 25.2+
Bornay 253+01.jpg Aerogenerador minieolica Bornay Wind 25.3+
Bornay 13+03.jpg Aerogenerador minieolica Bornay Wind 13+
Aerogenerador-Bornay-WindPlus-252 02.jpg Aerogenerador minieolica Bornay Wind 25.2+

The range of our small wind turbines, Wind+, goes a step further with the development of the small wind technology to an extent unknown in this technology.

Under an aesthetic already known, we have worked hard in an evolution towards more compatible, easier to install and better performance turbines.

Among the most notable challenges, the new Wind+ is equipped with permanent magnet neodymium alternator to a single output voltage of 220 Vac, for any application, providing maximum efficiency equipment. The second major challenge comes from the hand of the control electronics, with 2 drivers for all applications: Controller MPPT for battery charging and interface for direct connection of all types of consumption, both AC or DC, or grid connection inverters.

The new drivers introduce a new machine control system, which incorporates voltage control and rpm, ensuring perfect machine control, while substantially improving the efficiency of the wind turbine.

We have employed 8 years for the development of the new range of small wind turbines, Wind+, with the implication of three tecnicians and the collaboration with the UPV (Polytechnic University of Valencia). There have been interesting results at key points of development of small wind turbines: Up to 20% more output, lower startup speed, efficiency alternator up to 96%, compatible with all types of batteries (included Lithium), new compatibilities with direct consumption, remote monitoring...

With the Wind +, small wind turbines open a new stage, with many applications and integrations with other technologies.

Specifications

  Wind 13 + Wind 25.2 + Wind 25.3 +

 

Technical Specifications

Number of blades 2 2 3
Material Fiberglass and carbon fiber
Direction of rotation Counterclockwise
Control systems

1. Electronic regulator

2. Passive by tilting

 

Electrical specifications

Alternator Three phases permanent magnet
Magnets Neodymium
Nominal Power 1500 W 3000 W 5000 W
Peak Power 2500 W 4500 W 7500 W
Nominal Voltage 220 Vac 220 Vac 220 Vac
RPM @ 600 @ 400 @ 400
Controllers

Wind + MPPT Controller

     Multi voltage: 12, 24, 48 Vdc

     Current: Max. 125 Amp.

     Battery type: Flooded, AGM, Gel, Lithium

Wind + Interface

     Direct water pump AC or DC (Grundfos SQFlex)

     Telecom

     Grid connection

 

Performance, windspped

     
Working windspeed range 2 - 30 m/s 2 - 30 m/s 2 - 30 m/s
For turn on 3 m/s 3 m/s 3 m/s
For nominal power 12 m/s 12 m/s 12 m/s
For automatic brake system 14 m/s 14 m/s 14 m/s
Survival 60 m/s 60 m/s 60 m/s

 

Physical specications

Windturbine weight 41 Kg 93 Kg 107 Kg
Controller weight 30 Kg 30 Kg 30 Kg

Packaging

Dimensions - weight

50  x 77 x 57 cm - 68 Kg

153 x 27 x 7 cm - 7 Kg

120 x 80 x 80 cm - 150 Kg

220 x 40 x 15 cm - 19 Kg

120 x 80 x 80 cm - 160 Kg

260 x 40 x 15 cm - 22 Kg

Total 0,22 m3 - 65 Kg 0,90 m3 - 169 Kg. 0,91 m3 - 182 Kg.
Warranty 3 years 3 years 3 years

 

Controllers

Interface Wind +

Interface Wind + rectifies, controls and filter the energy produced by the wind turbine, and supplies energy suitable for use in different applications:

· Grid connection, interface supply direct current to a grid connection inverter. Available with ABB Wind grid connection inverters.


· Water pumping, interface supplies energy directly to the water pump, direct current to work with pumps like or alternate current at 230 V three phases to work with any kind of pump or motor.

· Telecom, this interface delivers direct current to supply directly to the telecom rectifiers or alternate current to the telecom inverters, depending of the telecom electronics manufacturer.

ModBus Communication, allows us a bi-directional communications between the different
components of the system: for energy management, monitoring, parameters change ...

Wind Turbine Input  
Input Three phases AC
Connectors MC4
Operating Voltage range 80 - 480 Vac
Maximum Voltage 510 Vac
Maximum power 3000 W (Wind 13+) / 6000 W (Wind 25+)
Braking Resistance 5000 W (Wind 13+) / 10000 W (Wind 25+)
Overvoltage protection Varistors
Output  
Tipo de salida CA / CC
Conectores MC4
Rango de voltaje 80 - 380 Vac / 100 - 450 Vac
Protección IGBT
Operacionales  
Consumo en reposo < 3 W
Consumo a máxima potencia < 30 W
Conexiones  
Anemometer Yes, Optional
Communications 2 x RS485 / 1 x RS232
USB 1 x mini USB Type B female
Bluetooth Optional with Bornay Bluetooth dongle
Emergency stop Yes, Brake switch
Remote emergency stop Yes, with external interruptor
Relay Free potential relayLibre de potencial, COM, NO, NC
Digital auxiliary inputs 2
Digital outputs Pulse frequency ouput to synchronize with inverters that allows F-P power curves signal
Physical  
Enclosure rate IP20
Material Aluminium
Color RAL7035
Cooling Forced ventilation
Mounting system Wall installation
Dimmensions

399 x 494 x 190 mm

220 x 490 x 353 mm (Optional Telecom Rack)

Packaging 280 x 480 x 560 mm - 0,08 m3
Weight 14 Kg (Wind 13+) / 18,5 Kg (Wind 25+)
Packaging Weight 16,5 Kg (Wind 13+) / 21 Kg (Wind 25+)

 

Applications

Rural electrification

Rural electrification

Solar Modules

Generates electricity using solar radiation: therefore, its use is limited to
daylight hours.

The number of the solar modules and its power depends on the total energy
required for the installation.

Windturbine

Generates electricity from wind power, either during the day or at night. Its power varies relative to the needs of the installation. Bornay produces windturbines with a power output of 1500, 3000 and
5000 W that covers all kind of needs.

Inverter

Transforms the stored DC into AC (120-220v. 50-60 Hz).

A battery charger can be integrated to charge the batteries from an external
source of electricity like a diesel generator.

MPPT Controller

Control, optimize and monitor the electricity generated by the wind turbine, the solar panels. It also controls the state of the battery bank. Prevents the overcharge of the battery bank

Battery

Store the energy produced by the wind turbine and solar panels, making it
available for later use.

It is recommended to have battery banks that last a minimum of three cays of
autonomy.

Water pumping

Water pumping

Windturbine

Generates electricity from wind power, either during the day or at night. Its power varies relative to the power of the submersible water pump. Bornay produces windturbines with a power output of 1500, 3000 and
5000 W that can supplies energy for pumps up to 5 kW.

Water Pump

Submersible pump, supplied at DC (Grundfos SQFlex) or AC at 220v. trhee phases from Wind + interface.

Wind + interface

Control, optimize and monitor the electricity generated by the wind turbine, supplying energy directly without any kind of acumulation, to the pump, with a variable voltage and frequency depending of the windspeed.

Telecom

Telecom

Windturbine

Generates electricity from wind power, either during the day or at night. Its power varies relative to the needs of the installation. Bornay produces windturbines with a power output of 1500, 3000 and
5000 W that covers all kind of needs.

Solar Modules

Generates electricity using solar radiation: therefore, its use is limited to
daylight hours.

The number of the solar modules and its power depends on the total energy
required for the installation.

Wind + interface

Control, optimize and monitor the electricity generated by the wind turbine, connecting the windturbine directly to the telecom system, thru the generic AC rectifiers or inverters.

Controller

Integrated into the Telecom system, controlls the energy produced by solar modules.

Battery

Store the energy produced by the wind turbine and solar panels, making it
available for later use.

It is recommended to have battery banks that last a minimum of three cays of
autonomy.

Grid connection

Grid connection

Windturbine

Generates electricity from wind power, either during the day or at night. Its power varies relative to the needs ore requirements of the installation. Bornay produces windturbines with a power output of 1500, 3000 and
5000 W.

Grid connection inverter

Transforms the energy generated by the wind turbine, in energy suitable to
send to the electrical grid.

Wind + interface

Control, optimize and monitor the electricity generated by the wind turbine, supplying controlled energy to the grid connection inverter.

Videos