Schneider Electric Inverter / Chargers

CONEXT XW+

Conext™ XW +, One solution for grid-tie backup and off-grid solar inputs.
  • Inversor-Cargador-Schneider-Conext-XW-Plus-1.jpg
  • Inversor-Cargador-Schneider-Conext-XW-Plus-3.jpg
  • Inversor-cargador-Schneider-Conext-XW-Plus-2.jpg
  • Inversor-Cargador-Trifásico-Schneider-Conext-XW-Plus-3CB.jpg
  • Inversor-cargador-Schneider-Conext-XW-Plus-CB-Regulador-Solar-MPPT.jpg
  • Inversor-Cargador-Schneider-Conext-XW-Plus-CB-Regulador-Solar-MPPT.jpg
  • Inversor-Cargador-Schneider-Conext-XW-Plus-CB.jpg
  • Inversor-Cargador-Schneider-Conext-XW-Plus-PDP-Regulador-Solar-MPPT.jpg
  • Conext-Battery-Monitor.jpg
  • Conext-SCP.jpg
  • Conext-ComBox.jpg
  • Battery-Fuse-Combiner-Box-250A.jpg

ConextTM XW+ is an adaptable single-phase and three-phase hybrid inverter with grid-tie functionality and dual AC power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further adaptability. From a single Conext XW+ unit to clusters up to 102 kW, the Conext XW+ is a scalable system that allows for the integration of solar capacity as required. Adaptable and scalable, the Schneider ElectricTM Conext XW+ system is the one solution for grid-interactive and off-grid, residential and commercial, solar and backup power applications.

Why choose Conext XW+?

Higher return on investment

• Excellent load starting with high 30-minute and 5-second power
• Performs in hot environments up to 70°C
• Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads
• Backup power with grid-tie functionality converts external DC power to AC power for export to the utility grid

Designed for reliability

• Extensive quality and reliability testing
• Highly Accelerated Life Testing (HALT)
• Globally proven and recognized field performance

Flexible

• Single or three phase systems from 7.0 kW to 102 kW
• Supports DC coupled and AC coupled off-grid and grid-tie architectures
• Supports charging of Lithium Ion battery packs

Easy to service

• Field serviceable with replacement boards and spare parts
• Monitor, troubleshoot or upgrade firmware with Conext ComBox

Easy to install

• System configures quickly into compact wall-mounted system
• Integrates both grid and generator power with dual AC inputs
• Balance of system components integrates battery bank, solar charge controllers and generators
• Commission the entire system with PC software tool and Conext ComBox

Do you want more information about this product?

bornay@bornay.com  |  (+34) 965 560 025  |  Skype

  XW+ 7048 E XW+ 8548 E
Inverter AC output    
Output power (continuous) at 25 ºC 5500 W 6800 W
Overload (30 min / 60 seg) at 25º C 7000 / 9500 W 8500 / 12000 W
Output power (continous) at 40º C 4500 W 6000 W
Maximum output current 60 seconds (rms) 40 A 53 A
Output frequency (selectable) 50 / 60 Hz 50 / 60 Hz
Output voltage 230 Vac 230 Vac
Total harmonic distorsion (THD) at rated power < 5 % < 5 %
Idle consumption search mode  < 7 W < 7 W
Input DC voltage range 40 to 64 V (48 V nominal) 40 to 64 V (48 V nominal)
Maximum input DC current 150 A 180 A
Charger DC output    
Maximum output charge current 110 A 140 A
Output charge voltage range 40 to 64 V (48 V nominal) 40 to 64 V (48 V nominal)
Charge control Three stages, two stage, boost, custom
Charge temperature compensation Battery temperature sensor included
Power factor corrected charging 0,98 0,98
Compatible battery types Flooded (default), Gel, AGM, LiON, custom
Battery bank range (scaled to PV array size) 440 to 10.000 Ah 440 to 10.000 Ah
AC input    
AC 1 (grid) input current (selectable limit) 3 -60 A (56 A default) 3 - 60 A (56 A default)
AC 2 (generator) input current (selectable) 3 -60 A (56 A default) 3 -60 A (56 A default)
Automatic transfer relay rating 60 A 60 A
Typical transfer time 8 ms 8 ms
AC input voltage nominal 230 V +/- 3% 230 V +/- 3%
AC input frequency range (bypass / charge modo) 45 - 55 Hz (default) 40 - 68 Hz (allowable)
AC grid-tie output    
Grid sell on AC1 (max) 4,5 kVA 6,0 kVA
Grid sell current range on AC1 (Selectable) 0 to 20 A 0 to 27 A
Grid sell voltage range on AC1 205 to 262 Vrms (auto adjust entering sell mode)
Grid sell frequency range on AC1 48 to 51 Hz (auto adjust entering sell mode)
Grid sell power factor range (lead/lag) 0,5 0,5
Efficiency    
Peak 95,8 % 95,8 %
General specifications    
Part number 865-7048-61 865-8548-61
Product / shipping weight 53,5 kgr / 75,0 Kgr 55,2 Kgr / 76,7 Kgr
Product dimensions ( H x W x D) 58 x 41 x 23 cm 58 x 41 x 23 cm
Shipping dimensions ( H x W x D) 71,1 x 57,2 x 39,4 cm 71,1 x 57,2 x 39,4 cm
IP degree protection IP 20 IP 20
Operating air temperature range - 25 ºC to 70 ºC (power derated above 25 ºC)
Warranty (Depending on the country of installation) 2 or 5 years 2 or 5 years
Features    
System monitoring and network communications Available Available
Intelligent features Grid sell, peak load shave, generator support, prioritized consumption of battery or external DC energy
Auxiliary port 0 to 12 V, maximum 250 mA DC ouput, selectable triggers
Off-grid AC coupling Frequency control
Multi-unit operation

Single phase: up to four units in parallel

Three phases: up to 12 units in multi-cluster configuration with external AC contactor

Regulatory approval    
CE marked according to the following EU directives and standards:
EMC directive EN61000-6-1, EN61000-6-3, EN61000-3-2
Low voltage directive EN50178
Safety IEC 62109-1, IEC 62109-2
RCM market and compliant AS 4777.2, AS 4777.3
Compatible products  
Conext XW+ Power Distribution panel 865-1014-01
Conext System control panel 865-1050
Conext Automatic Generator Start 865-1060
Conext MPPT 60 150 Solar Charge controller 865-1030-1
Conext MPPT 80 600 Solar Charge controller 865-1032
Conext ComBox 865-1058
Conext Battery Monitor 865-1080-01
Conext Battery fuse c 865-1031-01


Specifications are subject to change without notice.

Rural electrification

Rural electrification

Solar Modules

Generates electricity using solar radiation: therefore, its use is limited to
daylight hours.

The number of the solar modules and its power depends on the total energy
required for the installation.

Windturbine

Generates electricity from wind power, either during the day or at night. Its
power varies relative to the needs of the installation.

Bornay produces windturbines with a power output of 600, 800, 1500, 3000 and
6000 W that covers all kind of needs.

Inverter

Transforms the stored DC into AC (120-220v. 50-60 Hz).

A battery charger can be integrated to charge the batteries from an external
source of electricity like a diesel generator.

Controller

Controls the electricity generated by the wind turbine or the solar panels. It
also controls the state of the battery bank.

Prevents the overcharge and discharge of the battery bank

Battery

Store the energy produced by the wind turbine and solar panels, making it
available for later use.

It is recommended to have battery banks that last a minimum of three cays of
autonomy.

Grid connection

Grid connection

Windturbine

Generates electricity from wind power, either during the day or at night. Its
power varies relative to the needs of the installation.

Inverter

Transforms the stored DC into AC (120-220v. 50-60 Hz).

A battery charger can be integrated to charge the batteries from an external
source of electricity like a diesel generator.

Water pumping

Water pumping

Windturbine

Generates electricity from wind power, either during the day or at night. Its
power varies relative to the needs of the installation.

Bornay produces windturbines with a power output of 600, 800, 1500, 3000 and
6000 W that covers all kind of needs.

Water Pump

Submersible Pump, 220V alternating current fed to the inverter.

Inverter

Transforms the stored DC into AC (120-220v. 50-60 Hz).

A battery charger can be integrated to charge the batteries from an external
source of electricity like a diesel generator.

Controller

Controls the electricity generated by the wind turbine or the solar panels. It
also controls the state of the battery bank.

Prevents the overcharge and discharge of the battery bank

Battery

Store the energy produced by the wind turbine and solar panels, making it
available for later use.

It is recommended to have battery banks that last a minimum of three cays of
autonomy.

Telecom

Telecom

Windturbine

Generates electricity from wind power, either during the day or at night. Its
power varies relative to the needs of the installation.

Bornay produces windturbines with a power output of 600, 800, 1500, 3000 and
6000 W that covers all kind of needs.

Solar Modules

Generates electricity using solar radiation: therefore, its use is limited to
daylight hours.

The number of the solar modules and its power depends on the total energy
required for the installation.

Inverter

Transforms the stored DC into AC (120-220v. 50-60 Hz).

A battery charger can be integrated to charge the batteries from an external
source of electricity like a diesel generator.

Controller

Controls the electricity generated by the wind turbine or the solar panels. It
also controls the state of the battery bank.

Prevents the overcharge and discharge of the battery bank

Battery

Store the energy produced by the wind turbine and solar panels, making it
available for later use.

It is recommended to have battery banks that last a minimum of three cays of
autonomy.

 

We use own and third-party cookies to improve our services and obtain statistics by analyzing their browsing habits. You can accept the use of this site or reject it leaving the web. Get more information or how to change the settings: Cookies policy