Electronics

SMARTSHUNT

The SmartShunt is an all in one battery monitor, only without a display where your tablet or smartphone acts as the display.
 PDF sheet  Printable version
SmartShunt 1.jpg

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display.

The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively, the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.

The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used to monitor a second battery, for midpoint monitoring, or to connect a temperature sensor.

Differences compared to BMV712 Battery Monitor

  • No programmable visual and audible alarm.
  • No programmable relay.

SmartShunt 500 / 1000 / 2000 A
Supply voltage range 6,5 - 70 Vdc
Current Draw < 1 mA
Input voltage range, auxiliary battery 6,5 - 70 Vdc
Battery capacity (Ah) 1 - 9999 Ah
Operating temperature range -40 to +50 ºC
Second measure Yes, second battery voltage, midpoing or temperature
Temperature measurement range -20 to +50 ºC
VE.Direct communication port Yes
Resolution & Accuracy
Current ± 0,1A
Voltage ± 0,01 V
Amp hours ± 0,1 Ah
State of charge (0-100%) ± 0,1 %
Time to go  ± 1 min
Temperature ± 1ºC (optional temperature sensor needed)
Accuracy of current measurement ± 0,4 %
Offset Less than 20 / 40 / 80 mA
Accurace of voltage measurement ± 0,3 %
Installation & Dimensions
Dimensions (h x w x d)

500A: 46 x 120 x 54 mm

1000A: 68 x 120 x 54 mm

1500A: 58 x 120 x 76 mm 
Protection category IP21
Standards
Safety EN 60335-1
Emission / Immunity EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Automotive EN 50498
 
Cables (included)

Two cables with 1 A fuse for + connection

and starter battery or midpoint connection
Temperature sensor Optional ASS000100000

 

Catálogo General 2020

pdf Catalogo-Bornay-0520.pdf ( 21.51 MiB )

  • SmartShunt 1.jpg
  • SmartShunt 2.jpg
  • SmartShunt 3.jpg
  • SmartShunt 4.jpg
  • SmartShunt 5.jpg
  • SmartShunt 6.jpg
  • SmartShunt 7.jpg

Do you want more information about this product?

I accept the privacy policy
In accordance with the provisions of organic law 15/1999 of protection of Personal character data, BORNAY AEROGENERADORES SLU informs users of their websites that the personal data collected by the company through the sites forms on your pages, will be entered into an automated file under the responsibility of BORNAY AEROGENERADORES SLU, in order to facilitate, streamline, and the commitments established between both parties. Likewise, BORNAY AEROGENERADORES SLU advises of the possibility of exercising rights of access, cancellation, rectification and opposition by writing to the address BORNAY AEROGENERADORES SLU; PI RIU, RIU SN, 03420 CASTALLA. While you do not tell us otherwise, we will understand that their data has not been modified, that you agree to notify us of any changes, and we have the permission to use them in order to be able to retain the relationship between the parties.

bornay@bornay.com  |  (+34) 965 560 025  |  Skype