BLUESOLAR MPPT

Regulador-Solar-MPPT-Victron-Energy-150/70-mc4.jpg Regulador Solar Blue Solar MPPT 150/70 MC4
Regulador-Solar-MPPT-Victron-Energy-150/70.jpg Regulador Solar BlueSolar MPPT 150/70 de Victron Energy
Regulador-Solar-MPPT-Victron-Energy-BlueSolar-75/15.jpg Regulador Solar BlueSolar MPPT 75/15
Regulador-solar-MPPT-BlueSolar-75/15.jpg Regulador Solar BlueSolar MPPT
Regulador-Solar-MPPT-Victron-Energy-BlueSolar-150/70.jpg Regulador Solar BlueSolar MPPT 150/70

Ultra fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage.

Alternatively, an intelligent battery management algorithm can be chosen: see BatteryLife.

The load output is short circuit proof.

Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual for compatible products.

BatteryLife: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will be continually be cycled between a “partially charged” state and the “end of discharge” state. This mode of operation (no regular full recharge) will destroy a leadacid battery within weeks or months.

The BatteryLife algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i. e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Automatic battery voltage recognition

The MPPT 75/15 will automatically adjust to your system voltage.

75/10 to 100/15 Spedifications

 

MPPT 75/10

MPPT 75/15

MPPT 100/15

Performance

Battery voltage

12 / 24 Vdc

12 / 24 Vdc

12 / 24 Vdc

Self consumption

10 mA

10 mA

10 mA

DC input

Maximum PV power 12V

145 W (15 to 70 Vdc)*

220 W (15 to 70 Vdc)*

220 W (15 to 100 Vdc)*

Maximum PV power 24V

290 W (30 to 70 Vdc)*

440 W (30 to 70 Vdc)*

440 W (30 to 100 Vdc)*

Max PV open circuit voltage

75 Vcc

75 Vcc

100 Vcc

Peak efficiency

98 %

98 %

98 %

DC Output

Load current

15 Amp max

15 Amp max

15 Amp max

Absorption voltage

14,4 / 28,8 Vdc

14,4 / 28,8 Vdc

14,4 / 28,8 Vdc

Float voltage

13,8 / 27,6 Vdc

13,8 / 27,6 Vdc

13,8 / 27,6 Vdc

Charge algorithm

Multi stage adaptative

Temperature compensation

-16 mV/ºC rep. -32mV/ºC

Continuos peak load current

10 A

15 A

15 A

Low voltage load disconnect

11,1 / 22,2 V ó 11,8 / 23,6 V or BatteryLife algorithm

Low voltage load reconnect

13,1 V / 26,2 V ó 14 V / 28 V or BatteryLife algorithm

Ambiental specifications

Operating temperature

-30 a +60 ºC. Full rated output up to 40º C

Humidity

95%, non condensing

Enclosure and Environmental

Data communication port

VE.Direct

Power terminals

6 mm2

6 mm2

6 mm2

Protection category

IP65 / IP22 (conections)

Dimensions

100 x 113 x 40 mm

Weight

0,5 Kgr

Mounting

Vertical wall mount. Indoor only

Standards

Security

EN62109

100/30 - 100/50

 

MPPT 100/30

MPPT 100/50

Performance

Battery voltage

12 / 24 Vdc

12 / 24 Vdc

Self consumption

10 mA

1 mA

DC input

Maximum PV power 12V

440 W (15 to 80 Vdc)*

700 W (15 to 70 Vdc resp. 95V)*

Maximum PV power 24V

880 W (30 to 80 Vdc)*

1400 W (30 to 70 Vdc resp. 95V)*

Max PV open circuit voltage

100 Vdc

100 Vdc

Peak efficiency

98 %

98 %

DC Output

Absorption voltage

14,4 / 28,8 Vdc

14,4 / 28,8 Vdc

Float voltage

13,8 / 27,6 Vdc

13,8 / 27,6 Vdc

Charge algorithm

Multi stage adaptative

Temperature compensation

-16 mV/ºC rep. -32mV/ºC

Load current

30 A

50 A

Ambiental specifications

Operating temperature

-30 a +60 ºC. Full rated output up to 40º C

Humidity

95%, non condensing

Enclosure and Environmental

Data communication port

VE.Direct

Terminals

13 mm2

13 mm2

Protection category

IP43 / IP22 (conections)

Dimensions

130 x 186 x 70 mm

Weight

1,30 Kgr

Mounting

Vertical wall mount. Indoor only

Standards

Security

EN62109

150/35 to 150/100

 

MPPT 150/35 MPPT 150/45 MPPT 150/60 MPPT 150/70 MPPT 150/85 MPPT 150/100

Performance

Battery voltage

12/24/48 Vdc 12/24/48 Vdc 12/24/48 Vdc 12/24/48 Vdc 12/24/48 Vdc 12/24/48 Vdc

Self consumption

10 mA

10 mA

10 mA

10 mA

10 mA

10 mA

DC input

Maximum PV power 12V

500 W 650 W 860 W 1000 W 1200 W 1450 W

Maximum PV power 24V

1000 W 1300 W 1720 W 2000 W 2400 W 2900 W
Max PV open circuit voltage 2000 W 2600 W 3440 W 4000 W 4900 W 5800 W

Max PV open circuit voltage

150 Vdc 150 Vdc 150 Vdc 150 Vdc 150 Vdc 150 Vdc

Peak efficiency

98 %

98 %

98 %

98 % 98 % 98 %

DC Output

Absorption voltage

14,4 / 28,8 / 57,6 Vcc

Float voltage

13,8 / 27,6 / 55,2 Vcc

Charge algorithm

Multi stage adaptative

Temperature compensation

-16 mV/ºC rep. -32mV/ºC

Load current

35 A 45 A 60 A 70 A 85 A 100 A

Ambiental specifications

Operating temperature

-30 a +60 ºC. Full rated output up to 40º C

Humidity

95%, non condensing

Enclosure and Environmental

Data communication port

VE.Direct

Terminals

13 mm2

35 mm2 (Tr)

2 x MC4 (MC4)

35 mm2 (Tr)

2 x MC4 (MC4)

35 mm2 (Tr)

2 x MC4 (MC4)

35 mm2 (Tr)

3 x MC4 (MC4)

35 mm2 (Tr)

3 x MC4 (MC4)

Protection category

IP43 / IP22 (conections)

Dimensions

130 x 186 x 70 mm

Tr: 185 x 250 x 95 mm

MC4: 215 x 250 x 95 mm

Tr: 216 x 295 x 103 mm

MC4: 246 x 295 x 103 mm

Weight

1,25 Kgr

3 Kgr 4,5 Kgr

Mounting

Vertical wall mount. Indoor only

Standards

Security

EN62109

150 /70 - 150/85 VE.Can

 

MPPT 150/70

MPPT 150/85

Performance

Battery voltage

12 / 24 / 36 / 48 Vdc

Self consumption

12V: 0,55W / 24V: 0,75W / 36V: 0,90W / 48V: 1,00W

DC input

Maximum PV power 12V

1000 W 1200 W

Maximum PV power 24V

2000 W 2400 W
Maximum PV power 36V 3000 W 3600 W
Maximum PV power 48V 4000 W 4850 W

Max PV open circuit voltage

150 Vdc

150 Vdc

Peak efficiency

12V: 95% / 24V: 96,5% / 36V: 97% / 48V: 97,5%

DC Output

Absorption voltage

14.4 / 28.8 / 43.2 / 57.6V

Float voltage

13.7 / 27.4 / 41.1 / 54.8V

Equlization voltage 15.0 / 30.0 / 45 / 60V

Temperature compensation

-2,7 mV/ºC por cada elemento 2V

Load current

70 A

85 A

Ambiental specifications

Operating temperature

-40 a +60 ºC. Full rated output up to 40º C

Humidity

95%, non condensing

Enclosure and Environmental

Data communication port

VE.Can: 2 paralleled RJ45 connectors, NMEA 2000. Max. 25 units in parallel.

Terminals

35 mm2

35 mm2

Protection category

IP20

Dimensions

350 x 160 x 135 mm

Weight

4,2 Kgr

Mounting

Vertical wall mount. Indoor only

Standards

Security

EN60335-1

EMC EN61000-6-1, EN61000-6-3