AUTOMOTIVE IP65
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V/ to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail.
Output relay protects against reverse polarity connection.
Five LED’s for status and mode indication
Application: Flooded, AGM or GEL batteries.
Specifications
| Automotive 6V / 12V - 1,1 Amp | Automotive 12 V - 4 Amp | |
| Electrical specifications | ||
| Input Voltage Range |
200 – 265 V |
200 – 265 V |
| Frequency |
50 / 60 Hz |
50 / 60 Hz |
| Charge voltage "absorption" |
7,2 or 14,4 Vdc |
14,4 or 14,7 Vdc |
| Charge voltage "float" |
|
13,6 Vcc |
| Charge voltage "storage" |
|
13,2 Vcc |
| Charge current |
1,1 A |
4 A or 8 A |
| Can be used as power supply |
No |
|
| Back current drain |
3 Ah/mont (4 mA) |
0,25 Ah/month (0,3 mA) |
| Protection | Reverse poarity, Temperature | |
| Operating temperature range |
-20 to +40 ºC |
|
| Humidity |
Max. 95% non-condensating |
|
|
General specifications |
||
| Battery connection |
Black and red cable of 1,5 meter with battery clamps |
|
| 230 Vac connection |
Cable of 1,5 mts with CEE plug |
|
| Portection category |
IP 65 |
IP 65 |
| Weight |
0,56 Kgr |
0,56 Kgr |
| Dimensions |
42 x 61 x 185 mm |
42 x 61 x 185 mm |
|
Standards |
||
| Safety |
EN60335-1, EN60335-2-29 |
|
| Emission |
EN55014-1, EN 61000-6-3, EN 61000-3-2 |
|
| Immunity |
EN55014-2, EN61000-6-1, EN61000-6-2, EN61000-3-3 |
|
Do you want more information about this product?
bornay@bornay.com | (+34) 965 560 025 | Skype