BAE Batteries

PVS BLOCK

 PDF sheet  Printable version
Bateria-estacionari-BAE-GEL-PVS-Block.jpg

BAE Secura PVS solar batteries need only low maintenance and are used to store electric energy in medium and large solar photovoltaic installations.

Due to the robuts tubular plate design BAE PVS batteries are excellent suited for highest requirements regarding cycling ability and long life-time.

Design  
Positive electrode Tubular plate with a woven polyester gauntlet and solid grid in a corrosion-resistant PbSbSnSe-low antimony alloy
Negative electrode Grid plate in a low antimony alloy with long-life expander material
Separation Microporous separator
Electrolyte Sulphuric acid with a density of 1,24 Kg/l at 20 ºC
Container High impact, transparent SAN (Styrol-Acrylic-Nitrile), UL-94 rating: HB
Plugs Labyrinth plugs for arresting aerosols, optimal ceramic plugs or ceramic funnel plugs according to DIN 40740
Pole-bushing 100% gas and electrolyte-tight, sliding, plastic coated "Panzerpol"
Kind of protection IP 25 regarding EN 60529, touch protected according to VGV A3

 

Installation

  
BAE Secura PVS solar batteries are designed for indoor applications.

 

Maintenance

  

Every 6 months: check battery voltage, pilot cell voltages, temperatures

Every 12 months: check connections, record battery voltage, cell voltages and temperatures.

Every 3 years: average water refilling interval (depending of utilization and ambient temperature)

 

Operational data

  
Depth of discharge (DOD)

Max. 80% (Ue= 1,91 V/Cell for discharge times > 10 h; 1,80 V/Cell for 1 h)

Deep discharges of more than 80% DOD have to be avoided
Initial charge current Unlimited, the minimal charge current has to be 5A / 100 Ah C10
Cyclic operation charge voltage Restricted from 2,30 V to 2,40 V per cell, operating instruction is to be observed
Float Voltage 2.23 V/Cell
Cycles 3150 (A+B) according IEC 61427
Temperature -20 °C to 55 °C, recommended temperature range 10 ºC to 30 ºC
Self discharge Aprox. 3 % per month at 20 °C

 

Standards

  
Test standards IEC 60896-11, IEC 61427
Safety standard IEC 62485-2

 

Model

Nominal Capacity

C20 1.80 V/C

Ah.

Nominal Capacity

C100 1.80 V/C

Ah.

Nominal Capacity

C120 1.80 V/C

 Ah.

l

b/w

H*

Weight

Filled

.

Internal

Resistence

mohm.

Shortcircuit

Current

kA

12V 1 PVS 70

64

71

72

272

205

385

43,2

16,62

0,75

12V 2 PVS 140

125

140

140

272

205

385

51,4

8,91

1,40

12V 3 PVS 210

192

215

217

380

205

385

71,4

6,27

1,99

 

 

 

 

 

 

 

 

 

 

6V 4 PVS 280

254

287

289

272

205

385

47,6

2,47

2,52

6V 5 PVS 350

318

359

361

380

205

385

61,8

2,09

2,98

6V 6 PVS 420

382

431

434

380

205

385

67,5

1,82

3,42

 

 

 

 

 

 

 

 

 

 

 

BAE PVS Battery, connection diagram

Catálogo General 2020

pdf Catalogo-Bornay-0520.pdf ( 21.51 MiB )

  • Bateria-estacionari-BAE-GEL-PVS-Block.jpg
  • Baterías-estacionarias-BAE-PVS.jpg
  • Bateria-estacionaria-BAE-Sundepot.jpg

Do you want more information about this product?

I accept the privacy policy
In accordance with the provisions of organic law 15/1999 of protection of Personal character data, BORNAY AEROGENERADORES SLU informs users of their websites that the personal data collected by the company through the sites forms on your pages, will be entered into an automated file under the responsibility of BORNAY AEROGENERADORES SLU, in order to facilitate, streamline, and the commitments established between both parties. Likewise, BORNAY AEROGENERADORES SLU advises of the possibility of exercising rights of access, cancellation, rectification and opposition by writing to the address BORNAY AEROGENERADORES SLU; PI RIU, RIU SN, 03420 CASTALLA. While you do not tell us otherwise, we will understand that their data has not been modified, that you agree to notify us of any changes, and we have the permission to use them in order to be able to retain the relationship between the parties.

bornay@bornay.com  |  (+34) 965 560 025  |  Skype